Disclaimer : This article may contain affiliate links, this means that at no cost to you, we may receive a small commission for qualifying purchases. Learn more
Skateboard trucks are a fundamental accessory of the skateboard since they are utilized to join the wheels to the skateboard deck. Each skateboard needs two trucks that are appended through some specialized hardware to the underside of the board.
Skateboard trucks enable the rider to turn the board to one side or left relying upon their weight alteration, and make it conceivable to perform grinds on rails, edges, and slope adapting.
Skateboard trucks are commonly made of aluminum alloy which ensures their durability because they have to endure heavyweights. These skateboard trucks are also supposed to be lightweight so that the skateboarders can efficiently perform different tricks.
Trucks are readily available in a wide combination of sizes, styles, and hues for various kinds of skateboarding including vert skating, road skating, longboarding, and cruising.
How to choose Best Skateboard
Choosing a Skateboard is a task of high importance. The following things should be kept in mind while purchasing a skateboard.
- BasePlate:
A baseplate is the level piece of the truck, which mounts directly to the skate deck, guaranteeing even weight and a secured hold. The baseplate comes with four or six mounting holes which are aligned with the insert holes of the deck. A kingpin holds the entire truck together which should be of high quality. - Kingpin:
This is one of the most critical components of a skateboard truck. It is a bolt that holds the hanger, bushings, and baseplate together. - Hanger:
The hanger is the part where wheels are attached on either side of it. It should be made up of a sturdy material such as aluminum alloy to ensure durability. Usually, their weights are 10 – 13oz. While purchasing a truck, the width of the hanger should be kept into consideration. - Risers:
Risers make sure that there are as few vibrations during riding as possible, as well as keep the skateboard risen to an acceptable height. Longer screws are needed for attaching the risers. - Tightening the Kingpin:
As per earlier discussion, since kingpin is an integral component of skateboard trucks, therefore, its tightening is of ample importance. Tighten it correctly to get a range of motions along with easier turnings. - Non-Slip Axles:
The sliding axles can result in you getting knocked out of the place. If the skateboard comes down hard on either side, it means that the Axles are sliding. Make sure that the axles are non-slip to provide a smooth riding experience.
10 Best Skate Board Trucks Review
Our experts did a thorough research of products in the market. After a comprehensive evaluation of all the products, we have formalized a list of the 10 best Skateboard Trucks for you.
Let’s take a look best seller & special offer
# | Preview | Product | Price | |
---|---|---|---|---|
1 | INDEPENDENT Stage 11 Forged Hollow (Silver) Standard Trucks-144 | $61.54 $55.00 | BUY @ AMAZON | |
2 | Independent Pro Mid Trucks Lemos 139 | $45.99 $41.39 | BUY @ AMAZON |
10. Cal 7 Longboard Skateboard Combo Package
They are very lightweight and durable. The ability is made sure by the use of Aluminum alloy for making the base plate and the hanger.
The durometer wheels are 70mm, 78A which is perfect for riding on the streets at a swift speed.
Features
- Durable
- 78A durometer wheels
- Aluminum Alloy hanger and baseplate
9. Cal 7 Skateboard Package Combo with Trucks
The trucks are made up of Aluminum Alloy which makes them highly durable. The wheels are 99A PU whereas the bearings are ABEC 7. The 3mm riser pads prevent any wheel bite.
These trucks come in two options, either 5” or 5.25”. It is available in a massive collection of different matte, opaque, and transparent colors.
Features
- 99A PU Wheels
- ABEC 7 Bearings
- 3mm riser pads
8. LONGBOARD Skateboard TRUCKS COMBO set
This amazing product is durable, sturdy, and swift. Grade 8 Kingpins are used.
The risers are included in the package which prevents any wheel bite. The bearings and hardware are heavy duty. The PU Bushings used are 90A.
Features
- Grade 8 Kingpin
- 90A PU bushing
- Aluminum Alloy hanger and baseplate
7. Independent Skateboard Stage 11 Trucks
This amazing product is super lightweight equipped with grade 8 kingpins. The base plate and hanger are made of 356 T6 Aluminum alloy whereas the axle is made of Chromalloy steel. The steering and stability are much improved with better grind clearance.
Features
- Lightweight
- Grade 8 Kingpin
- 356 T6 Aluminum Baseplate and hanger
6. Paris V2 180mm 50° Longboard Skateboard Trucks
This amazingly durable and high strength product is made of 356.2 virgin aluminum gravity molded. The ultimate response and rebound are guaranteed by Paris urethane bushings.
Features
- High Strength
- Durable
- Grade 8 Steel Axles
- 356.2 Aluminum Gravity Molded
- Branded Kingpins
5. INDEPENDENT Skateboard Trucks
The product weighs 1.6 pounds. It is an extra durable and high-performance product. It can be used for any skateboarding by some serious skateboarders.
The hanger and base plate are made of 356 T6 Aluminum. It has high-quality stability, turns, and amazing grind clearance. They are 55mm in height.
Features
- Durable
- 356 T6 Aluminum Hanger
- Grade 8 Kingpin
- Solid Chromalloy Steel Axle
4. Sector 9 Gullwing Sidewinder II
This amazing product is built for extravagant turning and easy turning. Its double kingpin feature allows it to be steered for a longer distance.
Features
- Double Kingpin
- Turning / Pumping generates momentum
- 9” Sidewinder
3. Caliber Truck Co. 10-Inch Skateboard Truck
This fantastic product is swift as well as durable. Due to the usage of a 44-degree hanger, this skateboard truck can be amazing in downhill racing.
Also, the 89A rebound barrels allow the incredible stability of this product. Push it to the limits, and the product will positively respond.
Features
- Blood Orange Bushings
- 89A Double barrels
- Grade 8 Steel Kingpin
- 44-degree contained base plate
- 10” Axle
2. SCSK8 LONGBOARD Skateboard TRUCKS COMBO
The dimensions of this product are 10 x 8 x 4 inches and weigh 4 pounds. The package includes tools, mounting hardware, an extra set of bearings and spacers. It is economical and outstanding quality.
Features
- 7” Hanger, 9.75” Axle to Axle
- SCSK8 ABEC 9 Bearings
- 70 x 50 wheels
- 80A Hardness
1. Havoc 5.0 Skateboard Trucks
These trucks weigh 1.4 pounds and can be chosen by the skaters of different skill levels. They are available in either in skateboard molds or long molds in different colors. They are sturdy, light-weight, and can be a perfect choice.
Features
- Affordable
- Aluminum Alloy
- Standard Sized
Wrap it up:
You can choose any of the above skateboard package combos with trucks for either longboards or shortboards. They are agile, made for speed with no compromise on strength.
This comprehensive review will be of great help in your decision making for selecting the perfect Skateboard Truck.
Related Topics
Top Quality Materials Windshield Snow and Sun Cover for Car Protection
Best Outdoor Chaise Lounges Reviews in 2021
The Best Non-stick Bread Loaf Pan in 2021
10 Top Rated Vacuum Cleaner for Pets reviews in 2021
The Best Electric Hand Mixers Review in 2021
The Best Office Shredders Heavy Duty Review in 2021
10 Best Cleansing Tea and Detox Tea For Weight Loss reviews 2021
The Best Outdoor Storage Benches Waterproof in 2021
Best Electronic Alarm Clocks Reviews | Buying Guides and Tips 2021
10 Best Paper Trimmers And Cutters Reviews in 2021
Best Coffee K-cups And Single-Serve Pods in 2021
Best Handheld LED Flashlights with Rechargeable Battery in 2021